Skip to Content Skip to Navigation

Amusement Device Detials

The New York State Department of Labor inspects all amusement devices on or before the scheduled start date of an event. Only those devices deemed safe are allowed to operate. Detailed inspection results for each individual device will be posted within two weeks of the event start date.

For more information, look at our Frequently Asked Questions.

Details for device: Go Kart

Violation Summary

Violations Issued This Season: 8 Violations Complied at Time of Inspection: 2
Go Kart Violations
Date Cited Description Violation
3/30/2018 Remove all debris such as garbage and leaves from underneath go-kart seating pads.45-1.17
45-1.17A suitable number of containers for refuse shall be provided in and around amusement devices, temporary structures, viewing stands and tents. Excessive accumulations of trash or refuse shall be promptly removed. All parts of amusement devices, temporary structures, viewing stands and tents used by passengers or customers shall be maintained in a clean condition.
3/30/2018 Provide 2 missing lug nuts on rear right tire for car # 10.45-1.6(b)
45-1.6(b)Assembly work shall be performed in a proper and workmanlike manner. Parts shall be properly aligned, and shall not be bent, distorted, cut or otherwise injured to force a fit. Parts requiring lubrication shall be lubricated in course of assembly. Fastening and locking devices, such as bolts, cap screws, cotter pins, lock washers, etc. shall be installed where required. Nuts shall be drawn tight, cotter pins shall be spread and lock nuts firmly set.
3/30/2018 Replace all rubber bumpers which have full thickness cracks.45-1.6(c)
45-1.6(c)Parts which are excessively worn or which have been materially damaged shall not be used. Close visual inspection of parts shall be made during assembly to discover such wear or damage and immediate inspection of fastening devices shall be made after assembly to assure that they have been properly installed.
3/30/2018 All loose and flaking paint/ rust must be removed from the undersurface of the bridge so that it does not fall onto the track.45-1.6(c)
45-1.6(c)Parts which are excessively worn or which have been materially damaged shall not be used. Close visual inspection of parts shall be made during assembly to discover such wear or damage and immediate inspection of fastening devices shall be made after assembly to assure that they have been properly installed.
3/30/2018 Replace all ripped and worn padding for head rests and seat backs.45-6.9(b)
45-6.9(b)All go-karts shall incorporate within their design padding for component parts including but not limited to headrests and steering wheels.
3/30/2018 All throttle pedals need to be re- painted.45-6.9(c)
45-6.9(c)All go-karts shall incorporate within their design clearly marked brake and throttle pedals;
3/30/2018 Remove from service the 2 bad gas caps which did not comply with this section of the Code.45-6.9(d)
45-6.9(d)All go-kart fuels systems shall be designed to minimize fuel spills in the event of a rollover and be located away from exhaust, mounted to minimize the potential for rupture or damage in case of collision, or roll over and not capable of leaking more than one ounce of fuel from the tank during a five minute period when inverted;
3/30/2018 The brakes on car # 48 need adjustment or replacement.45-6.9(f)
45-6.9(f)Braking systems shall be capable of overriding the full power of the engine.

View All Events Listing

Thanks for the feedback! It will help us improve your experience.