Skip to Content Skip to Navigation

Amusement Device Detials

The New York State Department of Labor inspects all amusement devices on or before the scheduled start date of an event. Only those devices deemed safe are allowed to operate. Detailed inspection results for each individual device will be posted within two weeks of the event start date.

For more information, look at our Frequently Asked Questions.

Details for device: Mini Tea Cup

Violation Summary

Violations Issued This Season: 6 Violations Complied at Time of Inspection: 0
Mini Tea Cup Violations
Date Cited Description Violation
6/7/2017 no permit issued till all violations are complied45-1.13
45-1.13No person shall knowingly use, or suffer or permit to be used, an amusement device, temporary structure, viewing stand or tent, which is not properly assembled or which is defective or unsafe in any of its parts, components, controls or safety equipment.
6/7/2017 provide proper locks on all tubs45-1.6(b)
45-1.6(b)Assembly work shall be performed in a proper and workmanlike manner. Parts shall be properly aligned, and shall not be bent, distorted, cut or otherwise injured to force a fit. Parts requiring lubrication shall be lubricated in course of assembly. Fastening and locking devices, such as bolts, cap screws, cotter pins, lock washers, etc. shall be installed where required. Nuts shall be drawn tight, cotter pins shall be spread and lock nuts firmly set.
6/7/2017 replace r keys with proper cotter keys on platform45-1.6(b)
45-1.6(b)Assembly work shall be performed in a proper and workmanlike manner. Parts shall be properly aligned, and shall not be bent, distorted, cut or otherwise injured to force a fit. Parts requiring lubrication shall be lubricated in course of assembly. Fastening and locking devices, such as bolts, cap screws, cotter pins, lock washers, etc. shall be installed where required. Nuts shall be drawn tight, cotter pins shall be spread and lock nuts firmly set.
6/7/2017 fix brakes on all tubs45-1.6(c)
45-1.6(c)Parts which are excessively worn or which have been materially damaged shall not be used. Close visual inspection of parts shall be made during assembly to discover such wear or damage and immediate inspection of fastening devices shall be made after assembly to assure that they have been properly installed.
6/7/2017 provide proper id plate45-2.5(a)
45-2.5(a)Every amusement device shall be identified by a trade or descriptive name and an identification number. A metal plate upon which there is legibly impressed the name and number of the device, its model number if any and the name and address of its manufacturer shall be firmly attached to the device in a readily visible location. The maximum safe number of passengers and the maximum safe speed, where applicable, shall be legibly impressed on the same plate or another metal place.
6/7/2017 number all tubs45-2.5(b)
45-2.5(b)Each passenger carrying car, seat etc. in an amusement device or temporary structure shall be identified with an identification number in a readily visible location.

View All Events Listing

Thanks for the feedback! It will help us improve your experience.