Skip to Content Skip to Navigation

Amusement Device Detials

The New York State Department of Labor inspects all amusement devices on or before the scheduled start date of an event. Only those devices deemed safe are allowed to operate. Detailed inspection results for each individual device will be posted within two weeks of the event start date.

For more information, look at our Frequently Asked Questions.

Details for device: Happy Viking

Violation Summary

Violations Issued This Season: 12 Violations Complied at Time of Inspection: 4
Happy Viking Violations
Date Cited Description Violation
7/3/2017 This serves as 30 day notice for violation issued 5/19/2017 to repair the shoulder of tub 7. Current permit expires at end of this month.45-1.12(d)
45-1.12(d)Any violation of this part may result in a revocation, provided that written notice of non-compliance is served upon the owner specifying any violation of this part and directing the owner to correct such violations within 30 days of receipt of such notice.
9/15/2017 Replace the missing connection pin between car # 2 & 3. COMPLIED AT VISIT45-1.6(b)
45-1.6(b)Assembly work shall be performed in a proper and workmanlike manner. Parts shall be properly aligned, and shall not be bent, distorted, cut or otherwise injured to force a fit. Parts requiring lubrication shall be lubricated in course of assembly. Fastening and locking devices, such as bolts, cap screws, cotter pins, lock washers, etc. shall be installed where required. Nuts shall be drawn tight, cotter pins shall be spread and lock nuts firmly set.
9/15/2017 Replace the missing R Keys in the section of fence #10. COMPLIED AT VISIT45-1.6(b)
45-1.6(b)Assembly work shall be performed in a proper and workmanlike manner. Parts shall be properly aligned, and shall not be bent, distorted, cut or otherwise injured to force a fit. Parts requiring lubrication shall be lubricated in course of assembly. Fastening and locking devices, such as bolts, cap screws, cotter pins, lock washers, etc. shall be installed where required. Nuts shall be drawn tight, cotter pins shall be spread and lock nuts firmly set.
9/15/2017 Repair /replace the rioted deck support located near the access panel for track pin on the rear left side of the ride.45-1.6(c)
45-1.6(c)Parts which are excessively worn or which have been materially damaged shall not be used. Close visual inspection of parts shall be made during assembly to discover such wear or damage and immediate inspection of fastening devices shall be made after assembly to assure that they have been properly installed.
9/15/2017 Repair /replace the rioted deck support located near the access panel for track pin on the front left side of the ride.45-1.6(c)
45-1.6(c)Parts which are excessively worn or which have been materially damaged shall not be used. Close visual inspection of parts shall be made during assembly to discover such wear or damage and immediate inspection of fastening devices shall be made after assembly to assure that they have been properly installed.
9/15/2017 Repair /replace the rioted deck support located near the access panel for track pin on the front right side of the ride.45-1.6(c)
45-1.6(c)Parts which are excessively worn or which have been materially damaged shall not be used. Close visual inspection of parts shall be made during assembly to discover such wear or damage and immediate inspection of fastening devices shall be made after assembly to assure that they have been properly installed.
8/11/2017 Secure seat in tub 4. Do not load until complied.45-1.6(c)
45-1.6(c)Parts which are excessively worn or which have been materially damaged shall not be used. Close visual inspection of parts shall be made during assembly to discover such wear or damage and immediate inspection of fastening devices shall be made after assembly to assure that they have been properly installed.
8/11/2017 Secure seat in tub 9. Do not load until complied.45-1.6(c)
45-1.6(c)Parts which are excessively worn or which have been materially damaged shall not be used. Close visual inspection of parts shall be made during assembly to discover such wear or damage and immediate inspection of fastening devices shall be made after assembly to assure that they have been properly installed.
5/19/2017 Re-glass shoulder of tub 7 as flagged.45-1.6(c)
45-1.6(c)Parts which are excessively worn or which have been materially damaged shall not be used. Close visual inspection of parts shall be made during assembly to discover such wear or damage and immediate inspection of fastening devices shall be made after assembly to assure that they have been properly installed.
5/19/2017 Make the step platforms at the exit and entrance more secure from movement.45-2.13(a)(2)
45-2.13(a)(2)Safe and adequate means to access to and egress from amusement devices and temporary structures shall be provided. Such means of access and egress shall have secure treading and supporting surface free from debris, obstruction, projections and slipping, tripping and other hazards;
5/19/2017 Fully sink all nails into step platform.45-2.13(a)(2)
45-2.13(a)(2)Safe and adequate means to access to and egress from amusement devices and temporary structures shall be provided. Such means of access and egress shall have secure treading and supporting surface free from debris, obstruction, projections and slipping, tripping and other hazards;
5/19/2017 Renumber all tubs.45-2.5(b)
45-2.5(b)Each passenger carrying car, seat etc. in an amusement device or temporary structure shall be identified with an identification number in a readily visible location.

View All Events Listing

Thanks for the feedback! It will help us improve your experience.