Skip to Content Skip to Navigation

Amusement Device Detials

The New York State Department of Labor inspects all amusement devices on or before the scheduled start date of an event. Only those devices deemed safe are allowed to operate. Detailed inspection results for each individual device will be posted within two weeks of the event start date.

For more information, look at our Frequently Asked Questions.

Details for device: Road Course Track & Go-Karts

Violation Summary

Violations Issued This Season: 22 Violations Complied at Time of Inspection: 0
Road Course Track & Go-Karts Violations
Date Cited Description Violation
6/16/2017 Kart 87 Repair/replace body support strut passenger side of kart and replace missing rubber bumpers atop each strut. Do not operate until repairs are completed.45-1.6(c)
45-1.6(c)Parts which are excessively worn or which have been materially damaged shall not be used. Close visual inspection of parts shall be made during assembly to discover such wear or damage and immediate inspection of fastening devices shall be made after assembly to assure that they have been properly installed.
6/16/2017 Obtain and maintain on site the manufacturers written manual for all karts in use.45-6.5(a)
45-6.5(a)Manuals. Each owner of a go-kart track shall have available for review by the commissioner written maintenance and operational manuals.
8/31/2017 ie: as per ICR 45 obtain create maintenance manuals.45-6.5(a)(1)
45-6.5(a)(1)Maintenance manual. The requirements of section 45-1.11(b) of this Part shall apply to both the go-karts and the go-kart track. In addition to the requirements of section 45-1.11(b) of this Part, this manual shall include written procedures as required by this section.
8/31/2017 ie: as per ICR 45 obtain/create operational manuals for carts and tracks.45-6.5(a)(2)
45-6.5(a)(2)Operational manual. Each go-kart location having one or more go-kart tracks shall develop a written operational manual, which shall contain procedures as required by this section.
6/16/2017 Repair holes or cracks in pavement entrance turn 1, exit turn 2, straight away after turn 4, right lane at turn 5 and left lane at exit.as discussed with attendant.45-6.6(b)
45-6.6(b)Go-kart tracks shall be designed so that the surfaces are hard and smooth and free of ruts, holes, and bumps.
6/16/2017 Kart 6 - Repair or replace excessively worn seat belt. Do not load kart until repair is completed.45-6.9(a)
45-6.9(a)All go-karts shall incorporate within their design a system to restrain the occupants, and roll over protection to, retain the driver and/or passenger in the go-kart in the event of collision or roll over.
8/31/2017 Kart 6 - replace excessively worn seatbelt45-6.9(a)
45-6.9(a)All go-karts shall incorporate within their design a system to restrain the occupants, and roll over protection to, retain the driver and/or passenger in the go-kart in the event of collision or roll over.
8/31/2017 Kart 6 - Repai/replace broken or missing rubber bumpers attached to steel guard on front of kart. Do not operate until repair is complete.45-6.9(b)
45-6.9(b)All go-karts shall incorporate within their design padding for component parts including but not limited to headrests and steering wheels.
8/31/2017 Kart 4 - Repair replace broken or missing rubber bumpers attached to steel guard on front of kart. Do not operate until repair is complete.45-6.9(b)
45-6.9(b)All go-karts shall incorporate within their design padding for component parts including but not limited to headrests and steering wheels.
8/31/2017 Kart 9 - Repair/replace broken or missing rubber bumpers attached to steel guard on front of kart. Do not operate until repair is completed.45-6.9(b)
45-6.9(b)All go-karts shall incorporate within their design padding for component parts including but not limited to headrests and steering wheels.
8/31/2017 Kart 10 - Repair/replace broken or missing rubber bumper attached to steel guard on front of kart. Do not operate until repair is completed.45-6.9(b)
45-6.9(b)All go-karts shall incorporate within their design padding for component parts including but not limited to headrests and steering wheels.
8/31/2017 Kart 87 - Repair replace broken or missing rubber bumper attached to steel guard on front of kart Do not operate until repair is completed.45-6.9(b)
45-6.9(b)All go-karts shall incorporate within their design padding for component parts including but not limited to headrests and steering wheels.
8/31/2017 Kart 6 - Replace excessively worn seat belt.45-6.9(b)
45-6.9(b)All go-karts shall incorporate within their design padding for component parts including but not limited to headrests and steering wheels.
6/16/2017 Kart 9 - Repair or replace broken or missing rubber bumpers attached to steel guard on front of Kart. Do not operate until repair is completed.45-6.9(b)
45-6.9(b)All go-karts shall incorporate within their design padding for component parts including but not limited to headrests and steering wheels.
6/16/2017 Kart 4 - Repair or replace broken or missing rubber bumpers attached to steel guard on front of kart. Do not operate until repair is completed.45-6.9(b)
45-6.9(b)All go-karts shall incorporate within their design padding for component parts including but not limited to headrests and steering wheels.
6/16/2017 Kart 6 - Repair or replace broken or missing rubber bumpers attached to steel guard on front of kart. Do not operate until repair is completed.45-6.9(b)
45-6.9(b)All go-karts shall incorporate within their design padding for component parts including but not limited to headrests and steering wheels.
6/16/2017 Kart 10 - Repair or replace broken or missing rubber bumper attached to steel guard on front of kart. Do not operate until repair is completed.45-6.9(b)
45-6.9(b)All go-karts shall incorporate within their design padding for component parts including but not limited to headrests and steering wheels.
6/16/2017 Kart 87 - Repair or replace broken or missing rubber bumper attached to steel guard on front of kart. Do not operate until repair is completed.45-6.9(b)
45-6.9(b)All go-karts shall incorporate within their design padding for component parts including but not limited to headrests and steering wheels.
6/16/2017 Kart 14 Repair or replace excessively leaking fuel cap. Do not operate kart until repair is completed.45-6.9(d)
45-6.9(d)All go-kart fuels systems shall be designed to minimize fuel spills in the event of a rollover and be located away from exhaust, mounted to minimize the potential for rupture or damage in case of collision, or roll over and not capable of leaking more than one ounce of fuel from the tank during a five minute period when inverted;
6/16/2017 Kart 4 - Repair of replace excessively leaking fuel cap. Do not operate cart until repair is completed.45-6.9(d)
45-6.9(d)All go-kart fuels systems shall be designed to minimize fuel spills in the event of a rollover and be located away from exhaust, mounted to minimize the potential for rupture or damage in case of collision, or roll over and not capable of leaking more than one ounce of fuel from the tank during a five minute period when inverted;
6/16/2017 Kart 6 - Repair or replace excessively leaking fuel cap. Do not operate kart until repair is completed.45-6.9(d)
45-6.9(d)All go-kart fuels systems shall be designed to minimize fuel spills in the event of a rollover and be located away from exhaust, mounted to minimize the potential for rupture or damage in case of collision, or roll over and not capable of leaking more than one ounce of fuel from the tank during a five minute period when inverted;
6/16/2017 Kart 10 - Repair or replace excessively leaking fuel cap. Do not operate kart until repair is completed.45-6.9(d)
45-6.9(d)All go-kart fuels systems shall be designed to minimize fuel spills in the event of a rollover and be located away from exhaust, mounted to minimize the potential for rupture or damage in case of collision, or roll over and not capable of leaking more than one ounce of fuel from the tank during a five minute period when inverted;
6/16/2017 Kart 7 Repair or replace excessively leaking fuel cap. Do not operate kart until repair is completed.45-6.9(d)
45-6.9(d)All go-kart fuels systems shall be designed to minimize fuel spills in the event of a rollover and be located away from exhaust, mounted to minimize the potential for rupture or damage in case of collision, or roll over and not capable of leaking more than one ounce of fuel from the tank during a five minute period when inverted;
6/16/2017 Kart 87 Repair or replace excessively leaking fuel cap. Do not operate kart until repair is completed.45-6.9(d)
45-6.9(d)All go-kart fuels systems shall be designed to minimize fuel spills in the event of a rollover and be located away from exhaust, mounted to minimize the potential for rupture or damage in case of collision, or roll over and not capable of leaking more than one ounce of fuel from the tank during a five minute period when inverted;

View All Events Listing

Thanks for the feedback! It will help us improve your experience.