Skip to Content Skip to Navigation

Amusement Device Detials

The New York State Department of Labor inspects all amusement devices on or before the scheduled start date of an event. Only those devices deemed safe are allowed to operate. Detailed inspection results for each individual device will be posted within two weeks of the event start date.

For more information, look at our Frequently Asked Questions.

Details for device: Eurobungy Rock Wall Combo

Violation Summary

Violations Issued This Season: 11 Violations Complied at Time of Inspection: 9
Eurobungy Rock Wall Combo Violations
Date Cited Description Violation
10/13/2017 Change carabiner as noted45-1.6(c)
45-1.6(c)Parts which are excessively worn or which have been materially damaged shall not be used. Close visual inspection of parts shall be made during assembly to discover such wear or damage and immediate inspection of fastening devices shall be made after assembly to assure that they have been properly installed.
10/13/2017 Lubricate closure on carabiner as noted45-1.6(c)
45-1.6(c)Parts which are excessively worn or which have been materially damaged shall not be used. Close visual inspection of parts shall be made during assembly to discover such wear or damage and immediate inspection of fastening devices shall be made after assembly to assure that they have been properly installed.
10/13/2017 Repair exit gate on rock wall side before opening.45-1.6(c)
45-1.6(c)Parts which are excessively worn or which have been materially damaged shall not be used. Close visual inspection of parts shall be made during assembly to discover such wear or damage and immediate inspection of fastening devices shall be made after assembly to assure that they have been properly installed.
10/13/2017 Repair crack in C channel on right hand side as marked.45-1.6(c)
45-1.6(c)Parts which are excessively worn or which have been materially damaged shall not be used. Close visual inspection of parts shall be made during assembly to discover such wear or damage and immediate inspection of fastening devices shall be made after assembly to assure that they have been properly installed.
10/13/2017 Repair crack in tube steel on right hand side as marked45-1.6(c)
45-1.6(c)Parts which are excessively worn or which have been materially damaged shall not be used. Close visual inspection of parts shall be made during assembly to discover such wear or damage and immediate inspection of fastening devices shall be made after assembly to assure that they have been properly installed.
10/13/2017 Repair crack in C channel on left hand side as marked45-1.6(c)
45-1.6(c)Parts which are excessively worn or which have been materially damaged shall not be used. Close visual inspection of parts shall be made during assembly to discover such wear or damage and immediate inspection of fastening devices shall be made after assembly to assure that they have been properly installed.
10/13/2017 Repair crack in tube steel where meeting hinge on left hand side as marked45-1.6(c)
45-1.6(c)Parts which are excessively worn or which have been materially damaged shall not be used. Close visual inspection of parts shall be made during assembly to discover such wear or damage and immediate inspection of fastening devices shall be made after assembly to assure that they have been properly installed.
10/13/2017 Repair crack in tube steel where meeting the vertical support on the left hand side as marked45-1.6(c)
45-1.6(c)Parts which are excessively worn or which have been materially damaged shall not be used. Close visual inspection of parts shall be made during assembly to discover such wear or damage and immediate inspection of fastening devices shall be made after assembly to assure that they have been properly installed.
10/13/2017 Repair crack in hinge on right hand side as marked.45-1.6(c)
45-1.6(c)Parts which are excessively worn or which have been materially damaged shall not be used. Close visual inspection of parts shall be made during assembly to discover such wear or damage and immediate inspection of fastening devices shall be made after assembly to assure that they have been properly installed.
10/13/2017 Repair crack in tube where meeting bottom face of rock wall support structure45-1.6(c)
45-1.6(c)Parts which are excessively worn or which have been materially damaged shall not be used. Close visual inspection of parts shall be made during assembly to discover such wear or damage and immediate inspection of fastening devices shall be made after assembly to assure that they have been properly installed.
10/13/2017 Change weight limitation on sign to match that on the ID plate as 200 lbs before opening tomorrow.45-2.17(a)
45-2.17(a)Usage and warning signs. Legible signs shall be conspicuously posted containing safety guidelines to be followed and behavior or activities which are prohibited. Such signs shall contain warnings that there are inherent risks in the participation in or on the amusement device, since it is recognized that participation in or on the device may be hazardous regardless of all feasible safety measures that can be undertaken by the device owner or operator; and that there is a duty for the patrons to become apprised of the warnings and the risks inherent in participation in or on the amusement device if the warnings are not obeyed. Prior to participation in or on such amusement device, patrons shall familiarize themselves with the posted safety warnings so that they may make an informed decision of whether to participate in or on the device notwithstanding the risks.

View All Events Listing

Thanks for the feedback! It will help us improve your experience.