Skip to Content Skip to Navigation

Amusement Device Detials

The New York State Department of Labor inspects all amusement devices on or before the scheduled start date of an event. Only those devices deemed safe are allowed to operate. Detailed inspection results for each individual device will be posted within two weeks of the event start date.

For more information, look at our Frequently Asked Questions.

Details for device: Zipper

Violation Summary

Violations Issued This Season: 7 Violations Complied at Time of Inspection: 7
Zipper Violations
Date Cited Description Violation
5/25/2017 replace 4 missing r keys on k bars45-1.6(b)
45-1.6(b)Assembly work shall be performed in a proper and workmanlike manner. Parts shall be properly aligned, and shall not be bent, distorted, cut or otherwise injured to force a fit. Parts requiring lubrication shall be lubricated in course of assembly. Fastening and locking devices, such as bolts, cap screws, cotter pins, lock washers, etc. shall be installed where required. Nuts shall be drawn tight, cotter pins shall be spread and lock nuts firmly set.
7/12/2017 Repair the passenger compartment cushion in car # 4.45-1.6(c)
45-1.6(c)Parts which are excessively worn or which have been materially damaged shall not be used. Close visual inspection of parts shall be made during assembly to discover such wear or damage and immediate inspection of fastening devices shall be made after assembly to assure that they have been properly installed.
8/9/2017 Replace the worn out cotter pin on the door hinge for the left #1 car. COMPLIED AT VISIT45-1.6(c)
45-1.6(c)Parts which are excessively worn or which have been materially damaged shall not be used. Close visual inspection of parts shall be made during assembly to discover such wear or damage and immediate inspection of fastening devices shall be made after assembly to assure that they have been properly installed.
8/9/2017 Replace the broken Hydraulic gauge located on the center back side of the ride. COMPLIED AT VISIT45-1.6(c)
45-1.6(c)Parts which are excessively worn or which have been materially damaged shall not be used. Close visual inspection of parts shall be made during assembly to discover such wear or damage and immediate inspection of fastening devices shall be made after assembly to assure that they have been properly installed.
8/9/2017 Repair the broken weld left of the front center near trailer of the ride that the scenery is attached to. COMPLIED AT VISIT45-1.6(c)
45-1.6(c)Parts which are excessively worn or which have been materially damaged shall not be used. Close visual inspection of parts shall be made during assembly to discover such wear or damage and immediate inspection of fastening devices shall be made after assembly to assure that they have been properly installed.
7/25/2017 Replace the unreadable caution sticker inside tub #3, Compled at visit45-2.17(a)
45-2.17(a)Usage and warning signs. Legible signs shall be conspicuously posted containing safety guidelines to be followed and behavior or activities which are prohibited. Such signs shall contain warnings that there are inherent risks in the participation in or on the amusement device, since it is recognized that participation in or on the device may be hazardous regardless of all feasible safety measures that can be undertaken by the device owner or operator; and that there is a duty for the patrons to become apprised of the warnings and the risks inherent in participation in or on the amusement device if the warnings are not obeyed. Prior to participation in or on such amusement device, patrons shall familiarize themselves with the posted safety warnings so that they may make an informed decision of whether to participate in or on the device notwithstanding the risks.
7/25/2017 Repair the flooring in tub #1, complied at visit45-2.20
45-2.20The interior and exterior parts of all passenger-carrying amusement devices with which a passenger may come in contact shall be smooth and rounded, free from sharp, rough or splintered edges and corners, with no protruding studs, bolts, screws or other projections which might cause injury. Interior parts upon or against which a passenger may be forcibly thrown by the action of the amusement device shall be adequately padded. Devices which are self-powered and which are operated by a passenger shall have the driving mechanism so guarded and the guards so locked in place as to prevent passengers from gaining access to the mechanism. Such belts, bars, foot rests and other equipment as may be necessary for safe entrance and exit and for support while the device is in operation shall be provided. Such equipment and fastenings thereof shall be of sufficient strength to retain the passengers. The fastenings shall be of a type which cannot be inadvertently released

View All Events Listing

Thanks for the feedback! It will help us improve your experience.