Skip to Content Skip to Navigation

Amusement Device Detials

The New York State Department of Labor inspects all amusement devices on or before the scheduled start date of an event. Only those devices deemed safe are allowed to operate. Detailed inspection results for each individual device will be posted within two weeks of the event start date.

For more information, look at our Frequently Asked Questions.

Details for device: Glass House

Violation Summary

Violations Issued This Season: 5 Violations Complied at Time of Inspection: 5
Glass House Violations
Date Cited Description Violation
8/9/2017 Remove Nails and replace with R Keys in 2 scenery braces on the back of ride as marked by inspector.45-1.6(b)
45-1.6(b)Assembly work shall be performed in a proper and workmanlike manner. Parts shall be properly aligned, and shall not be bent, distorted, cut or otherwise injured to force a fit. Parts requiring lubrication shall be lubricated in course of assembly. Fastening and locking devices, such as bolts, cap screws, cotter pins, lock washers, etc. shall be installed where required. Nuts shall be drawn tight, cotter pins shall be spread and lock nuts firmly set.
8/9/2017 Provide R key were missing on back of scenery panel on front end of trailer.45-1.6(b)
45-1.6(b)Assembly work shall be performed in a proper and workmanlike manner. Parts shall be properly aligned, and shall not be bent, distorted, cut or otherwise injured to force a fit. Parts requiring lubrication shall be lubricated in course of assembly. Fastening and locking devices, such as bolts, cap screws, cotter pins, lock washers, etc. shall be installed where required. Nuts shall be drawn tight, cotter pins shall be spread and lock nuts firmly set.
8/9/2017 Replace worn piece of Dimond plate at slide start position.45-1.6(c)
45-1.6(c)Parts which are excessively worn or which have been materially damaged shall not be used. Close visual inspection of parts shall be made during assembly to discover such wear or damage and immediate inspection of fastening devices shall be made after assembly to assure that they have been properly installed.
8/9/2017 Provide weather tight outlet covers for scenery lighting on back side of top scenery.45-2.21(l)
45-2.21(l)All receptacles and attachment caps shall be of the grounding type.
8/9/2017 Provide that wires for lighting is properly covered by protective sheathing on top panels of device.45-2.21(n)
45-2.21(n)Wiring laid on surfaces traversed by vehicular or pedestrian traffic shall be adequately protected against wear and abrasion.

View All Events Listing

Thanks for the feedback! It will help us improve your experience.