The New York State Department of Labor inspects all amusement devices on or before the scheduled start date of an event. Only those devices deemed safe are allowed to operate. Detailed inspection results for each individual device will be posted within two weeks of the event start date.
For more information, look at our Frequently Asked Questions.
|5/5/2017||Repair/replace damaged aluminum outer vertical tank support.||45-1.6(c)|
45-1.6(c)Parts which are excessively worn or which have been materially damaged shall not be used. Close visual inspection of parts shall be made during assembly to discover such wear or damage and immediate inspection of fastening devices shall be made after assembly to assure that they have been properly installed.
|5/5/2017||Provide a metal identification Plate in accordance with Code Rule 45-2.5(a).||45-2.5(a)|
45-2.5(a)Every amusement device shall be identified by a trade or descriptive name and an identification number. A metal plate upon which there is legibly impressed the name and number of the device, its model number if any and the name and address of its manufacturer shall be firmly attached to the device in a readily visible location. The maximum safe number of passengers and the maximum safe speed, where applicable, shall be legibly impressed on the same plate or another metal place.
Thanks for the feedback! It will help us improve your experience.