The New York State Department of Labor inspects all amusement devices on or before the scheduled start date of an event. Only those devices deemed safe are allowed to operate. Detailed inspection results for each individual device will be posted within two weeks of the event start date.
For more information, look at our Frequently Asked Questions.
|6/1/2017||Permit expired 5/31/19. Payment not received in time to issue valid permit. Ride Closed.||45-1.12(a)|
45-1.12(a)Permit required. No amusement device, viewing stand or tent may be operated in the state without a permit issued by the commissioner except as provided by section 45-1.2(c) of this Subpart.
|5/4/2017||Ride needs to be properly blocked.||45-1.6(b)|
45-1.6(b)Assembly work shall be performed in a proper and workmanlike manner. Parts shall be properly aligned, and shall not be bent, distorted, cut or otherwise injured to force a fit. Parts requiring lubrication shall be lubricated in course of assembly. Fastening and locking devices, such as bolts, cap screws, cotter pins, lock washers, etc. shall be installed where required. Nuts shall be drawn tight, cotter pins shall be spread and lock nuts firmly set.
|8/3/2017||block ride properly||45-2.10(c)|
45-2.10(c)Before being used by the public, amusement devices and temporary structures shall be so placed or secured with blocking, cribbing, outriggers, guys or other means as to be stable under all operating conditions.
|5/4/2017||Repair all unoperable seat restraint ropes. Most are frayed and not poroperly engaging.||45-2.20|
45-2.20The interior and exterior parts of all passenger-carrying amusement devices with which a passenger may come in contact shall be smooth and rounded, free from sharp, rough or splintered edges and corners, with no protruding studs, bolts, screws or other projections which might cause injury. Interior parts upon or against which a passenger may be forcibly thrown by the action of the amusement device shall be adequately padded. Devices which are self-powered and which are operated by a passenger shall have the driving mechanism so guarded and the guards so locked in place as to prevent passengers from gaining access to the mechanism. Such belts, bars, foot rests and other equipment as may be necessary for safe entrance and exit and for support while the device is in operation shall be provided. Such equipment and fastenings thereof shall be of sufficient strength to retain the passengers. The fastenings shall be of a type which cannot be inadvertently released
|6/1/2017||Key switch needed.||45-2.21(o)|
45-2.21(o)Each electrically operated amusement device not designed to be controlled directly by the passenger shall be provided with a disconnect power switch placed within easy reach of the operator.
Thanks for the feedback! It will help us improve your experience.