Skip to Content Skip to Navigation

Amusement Device Detials

The New York State Department of Labor inspects all amusement devices on or before the scheduled start date of an event. Only those devices deemed safe are allowed to operate. Detailed inspection results for each individual device will be posted within two weeks of the event start date.

For more information, look at our Frequently Asked Questions.

Details for device: Dizzy Dragon

Violation Summary

Violations Issued This Season: 9 Violations Complied at Time of Inspection: 2
Dizzy Dragon Violations
Date Cited Description Violation
6/7/2017 Replace popped r-key under Tub #2. Complied at visit45-1.6(b)
45-1.6(b)Assembly work shall be performed in a proper and workmanlike manner. Parts shall be properly aligned, and shall not be bent, distorted, cut or otherwise injured to force a fit. Parts requiring lubrication shall be lubricated in course of assembly. Fastening and locking devices, such as bolts, cap screws, cotter pins, lock washers, etc. shall be installed where required. Nuts shall be drawn tight, cotter pins shall be spread and lock nuts firmly set.
6/1/2017 Do not load pink dragon until stair spring is correctly installed.45-1.6(b)
45-1.6(b)Assembly work shall be performed in a proper and workmanlike manner. Parts shall be properly aligned, and shall not be bent, distorted, cut or otherwise injured to force a fit. Parts requiring lubrication shall be lubricated in course of assembly. Fastening and locking devices, such as bolts, cap screws, cotter pins, lock washers, etc. shall be installed where required. Nuts shall be drawn tight, cotter pins shall be spread and lock nuts firmly set.
6/1/2017 Do not load pink dragon until brake switch is repaired.45-1.6(c)
45-1.6(c)Parts which are excessively worn or which have been materially damaged shall not be used. Close visual inspection of parts shall be made during assembly to discover such wear or damage and immediate inspection of fastening devices shall be made after assembly to assure that they have been properly installed.
8/1/2017 Repair or replace the stairs on tub # 3. They do not lock properly. DO NOT LOAD THE TUB UNTIL IT IS REPAIRED.45-1.6(c)
45-1.6(c)Parts which are excessively worn or which have been materially damaged shall not be used. Close visual inspection of parts shall be made during assembly to discover such wear or damage and immediate inspection of fastening devices shall be made after assembly to assure that they have been properly installed.
8/11/2017 Add / Replace the Foam noodle at the inside center pole to reduce the 2" gap that something could get caught in the top of the center metal sleeve in Dragon #2. COMPLIED AT VISIT45-1.6(c)
45-1.6(c)Parts which are excessively worn or which have been materially damaged shall not be used. Close visual inspection of parts shall be made during assembly to discover such wear or damage and immediate inspection of fastening devices shall be made after assembly to assure that they have been properly installed.
8/11/2017 Add / Replace the Foam noodle at the inside center pole to reduce the 2" gap that something could get caught in the top of the center metal sleeve in Dragon #3. COMPLIED AT VISIT45-1.6(c)
45-1.6(c)Parts which are excessively worn or which have been materially damaged shall not be used. Close visual inspection of parts shall be made during assembly to discover such wear or damage and immediate inspection of fastening devices shall be made after assembly to assure that they have been properly installed.
8/11/2017 Replace the worn out connection link for the spring to the steps on the left side of Dragon#2. COMPLIED AT VISIT45-1.6(c)
45-1.6(c)Parts which are excessively worn or which have been materially damaged shall not be used. Close visual inspection of parts shall be made during assembly to discover such wear or damage and immediate inspection of fastening devices shall be made after assembly to assure that they have been properly installed.
8/11/2017 Add / Replace the Foam noodle at the inside center pole to reduce the 2'' gap that something could get caught in the top of the center metal sleeve in Dragon #1. COMPLIED AT VISIT45-1.6(c)
45-1.6(c)Parts which are excessively worn or which have been materially damaged shall not be used. Close visual inspection of parts shall be made during assembly to discover such wear or damage and immediate inspection of fastening devices shall be made after assembly to assure that they have been properly installed.
7/27/2017 Install the (2) missing warning stickers on either side of the steps to the Blue dragon45-2.17(a)
45-2.17(a)Usage and warning signs. Legible signs shall be conspicuously posted containing safety guidelines to be followed and behavior or activities which are prohibited. Such signs shall contain warnings that there are inherent risks in the participation in or on the amusement device, since it is recognized that participation in or on the device may be hazardous regardless of all feasible safety measures that can be undertaken by the device owner or operator; and that there is a duty for the patrons to become apprised of the warnings and the risks inherent in participation in or on the amusement device if the warnings are not obeyed. Prior to participation in or on such amusement device, patrons shall familiarize themselves with the posted safety warnings so that they may make an informed decision of whether to participate in or on the device notwithstanding the risks.

View All Events Listing

Thanks for the feedback! It will help us improve your experience.