Skip to Content Skip to Navigation

Amusement Device Detials

The New York State Department of Labor inspects all amusement devices on or before the scheduled start date of an event. Only those devices deemed safe are allowed to operate. Detailed inspection results for each individual device will be posted within two weeks of the event start date.

For more information, look at our Frequently Asked Questions.

Details for device: Ferris Wheel

Violation Summary

Violations Issued This Season: 8 Violations Complied at Time of Inspection: 7
Ferris Wheel Violations
Date Cited Description Violation
6/8/2017 The wind brace on the right side of the ride as you enter was missing the locking pin on the top trailer connection. Place longing pin in the trailer connection on the top.45-1.6(a)
45-1.6(a)Competent supervision. The assembly and disassembly of an amusement device, temporary structure, viewing stand or tent shall be done by or under the immediate supervision of a person experienced and instructed in the proper performance of such work in respect to the device, structure, viewing stand or tent.
7/25/2017 Tighten air lock on hair guard on #1045-1.6(b)
45-1.6(b)Assembly work shall be performed in a proper and workmanlike manner. Parts shall be properly aligned, and shall not be bent, distorted, cut or otherwise injured to force a fit. Parts requiring lubrication shall be lubricated in course of assembly. Fastening and locking devices, such as bolts, cap screws, cotter pins, lock washers, etc. shall be installed where required. Nuts shall be drawn tight, cotter pins shall be spread and lock nuts firmly set.
6/22/2017 Secure the seat back padding for car #12.COMPLIED AT VISIT45-1.6(b)
45-1.6(b)Assembly work shall be performed in a proper and workmanlike manner. Parts shall be properly aligned, and shall not be bent, distorted, cut or otherwise injured to force a fit. Parts requiring lubrication shall be lubricated in course of assembly. Fastening and locking devices, such as bolts, cap screws, cotter pins, lock washers, etc. shall be installed where required. Nuts shall be drawn tight, cotter pins shall be spread and lock nuts firmly set.
6/22/2017 Repair the popped air lock for the protective cover on the right side of car #10. COMPLIED AT VISIT45-1.6(b)
45-1.6(b)Assembly work shall be performed in a proper and workmanlike manner. Parts shall be properly aligned, and shall not be bent, distorted, cut or otherwise injured to force a fit. Parts requiring lubrication shall be lubricated in course of assembly. Fastening and locking devices, such as bolts, cap screws, cotter pins, lock washers, etc. shall be installed where required. Nuts shall be drawn tight, cotter pins shall be spread and lock nuts firmly set.
6/29/2017 The junction box above the main support post on the right hand side of the unit is missing. Replace as discussed.45-1.6(c)
45-1.6(c)Parts which are excessively worn or which have been materially damaged shall not be used. Close visual inspection of parts shall be made during assembly to discover such wear or damage and immediate inspection of fastening devices shall be made after assembly to assure that they have been properly installed.
6/22/2017 Adjust the out rigger cribbing so it is center under the out rigger. COMPLIED AT VISIT45-2.10(c)
45-2.10(c)Before being used by the public, amusement devices and temporary structures shall be so placed or secured with blocking, cribbing, outriggers, guys or other means as to be stable under all operating conditions.
6/22/2017 Replace the rioted cribbing that is under the right out rigger. COMPLIED AT VISIT45-2.10(c)
45-2.10(c)Before being used by the public, amusement devices and temporary structures shall be so placed or secured with blocking, cribbing, outriggers, guys or other means as to be stable under all operating conditions.
6/22/2017 Replace the missing bolt in the protective cover that blocks the cable pulls.45-2.18
45-2.18Machinery used in or with an amusement device shall be enclosed, barricaded or otherwise effectively guarded against contact. Guards removed for maintenance purposes shall be replaced before normal operation is resumed.

View All Events Listing

Thanks for the feedback! It will help us improve your experience.