Skip to Content Skip to Navigation

Amusement Device Detials

The New York State Department of Labor inspects all amusement devices on or before the scheduled start date of an event. Only those devices deemed safe are allowed to operate. Detailed inspection results for each individual device will be posted within two weeks of the event start date.

For more information, look at our Frequently Asked Questions.

Details for device: Wacky Shack

Violation Summary

Violations Issued This Season: 7 Violations Complied at Time of Inspection: 1
Wacky Shack Violations
Date Cited Description Violation
9/22/2017 The exit railing anchor pin has broken off and cannot be secured in place. Make repairs as necessary.45-1.6(c)
45-1.6(c)Parts which are excessively worn or which have been materially damaged shall not be used. Close visual inspection of parts shall be made during assembly to discover such wear or damage and immediate inspection of fastening devices shall be made after assembly to assure that they have been properly installed.
9/22/2017 The anchor loops for the missing devices in the fun house are trip hazards without the devices. Make repairs or remove the trip hazards.45-1.6(c)
45-1.6(c)Parts which are excessively worn or which have been materially damaged shall not be used. Close visual inspection of parts shall be made during assembly to discover such wear or damage and immediate inspection of fastening devices shall be made after assembly to assure that they have been properly installed.
9/22/2017 The metal sidewall paneling inside the funhouse has rusted through creating sharp rusted edges. Make repairs as necessary.45-1.6(c)
45-1.6(c)Parts which are excessively worn or which have been materially damaged shall not be used. Close visual inspection of parts shall be made during assembly to discover such wear or damage and immediate inspection of fastening devices shall be made after assembly to assure that they have been properly installed.
9/22/2017 One of the secondary safety chains for the top scenery is broken. Make repairs as needed.45-1.6(c)
45-1.6(c)Parts which are excessively worn or which have been materially damaged shall not be used. Close visual inspection of parts shall be made during assembly to discover such wear or damage and immediate inspection of fastening devices shall be made after assembly to assure that they have been properly installed.
7/25/2017 Weld (and cover errant edges - if necessary) two broken metal strips on the floor as flagged. Do not open the ride until complied.45-1.6(c)
45-1.6(c)Parts which are excessively worn or which have been materially damaged shall not be used. Close visual inspection of parts shall be made during assembly to discover such wear or damage and immediate inspection of fastening devices shall be made after assembly to assure that they have been properly installed.
7/25/2017 Cover points on pink railing as flagged45-1.6(c)
45-1.6(c)Parts which are excessively worn or which have been materially damaged shall not be used. Close visual inspection of parts shall be made during assembly to discover such wear or damage and immediate inspection of fastening devices shall be made after assembly to assure that they have been properly installed.
6/15/2017 Replace the fire extinguisher that is in the power room. Can not tell on the tag when it was last inspected. COMPIED AT VISIT45-2.23(b)
45-2.23(b)Approved fire extinguishers shall be provided where necessary to secure reasonable and adequate protection from fire hazards.

View All Events Listing

Thanks for the feedback! It will help us improve your experience.