Skip to Content Skip to Navigation

Amusement Device Detials

The New York State Department of Labor inspects all amusement devices on or before the scheduled start date of an event. Only those devices deemed safe are allowed to operate. Detailed inspection results for each individual device will be posted within two weeks of the event start date.

For more information, look at our Frequently Asked Questions.

Details for device: Berry Go Round

Violation Summary

Violations Issued This Season: 6 Violations Complied at Time of Inspection: 5
Berry Go Round Violations
Date Cited Description Violation
6/15/2017 Adjust the support leg of the ride as flagged.45-1.6(a)
45-1.6(a)Competent supervision. The assembly and disassembly of an amusement device, temporary structure, viewing stand or tent shall be done by or under the immediate supervision of a person experienced and instructed in the proper performance of such work in respect to the device, structure, viewing stand or tent.
6/15/2017 Adjust the support leg of the ride as flagged.45-1.6(a)
45-1.6(a)Competent supervision. The assembly and disassembly of an amusement device, temporary structure, viewing stand or tent shall be done by or under the immediate supervision of a person experienced and instructed in the proper performance of such work in respect to the device, structure, viewing stand or tent.
6/15/2017 Protect the sharp edges of tub # 2, on the left looking in from the outside, sharp edge is the left side of the tub.45-1.6(a)
45-1.6(a)Competent supervision. The assembly and disassembly of an amusement device, temporary structure, viewing stand or tent shall be done by or under the immediate supervision of a person experienced and instructed in the proper performance of such work in respect to the device, structure, viewing stand or tent.
6/15/2017 The spring on the right side of tub# 4, requires a protective cover.45-1.6(a)
45-1.6(a)Competent supervision. The assembly and disassembly of an amusement device, temporary structure, viewing stand or tent shall be done by or under the immediate supervision of a person experienced and instructed in the proper performance of such work in respect to the device, structure, viewing stand or tent.
8/14/2017 Properly install the cube for the electric brake under tub #2. Complied at visit45-1.6(b)
45-1.6(b)Assembly work shall be performed in a proper and workmanlike manner. Parts shall be properly aligned, and shall not be bent, distorted, cut or otherwise injured to force a fit. Parts requiring lubrication shall be lubricated in course of assembly. Fastening and locking devices, such as bolts, cap screws, cotter pins, lock washers, etc. shall be installed where required. Nuts shall be drawn tight, cotter pins shall be spread and lock nuts firmly set.
7/11/2017 Repair loose door trim on tub #4.45-2.20
45-2.20The interior and exterior parts of all passenger-carrying amusement devices with which a passenger may come in contact shall be smooth and rounded, free from sharp, rough or splintered edges and corners, with no protruding studs, bolts, screws or other projections which might cause injury. Interior parts upon or against which a passenger may be forcibly thrown by the action of the amusement device shall be adequately padded. Devices which are self-powered and which are operated by a passenger shall have the driving mechanism so guarded and the guards so locked in place as to prevent passengers from gaining access to the mechanism. Such belts, bars, foot rests and other equipment as may be necessary for safe entrance and exit and for support while the device is in operation shall be provided. Such equipment and fastenings thereof shall be of sufficient strength to retain the passengers. The fastenings shall be of a type which cannot be inadvertently released

View All Events Listing

Thanks for the feedback! It will help us improve your experience.