Skip to Content Skip to Navigation

Amusement Device Detials

The New York State Department of Labor inspects all amusement devices on or before the scheduled start date of an event. Only those devices deemed safe are allowed to operate. Detailed inspection results for each individual device will be posted within two weeks of the event start date.

For more information, look at our Frequently Asked Questions.

Details for device: Go Karts

Violation Summary

Violations Issued This Season: 6 Violations Complied at Time of Inspection: 0
Go Karts Violations
Date Cited Description Violation
4/21/2017 Provide missing lug nut on car # 14 (rear right wheel) and # 9 (rear left wheel).45-1.6(b)
45-1.6(b)Assembly work shall be performed in a proper and workmanlike manner. Parts shall be properly aligned, and shall not be bent, distorted, cut or otherwise injured to force a fit. Parts requiring lubrication shall be lubricated in course of assembly. Fastening and locking devices, such as bolts, cap screws, cotter pins, lock washers, etc. shall be installed where required. Nuts shall be drawn tight, cotter pins shall be spread and lock nuts firmly set.
4/21/2017 Replace all tires on car # 46.45-1.6(c)
45-1.6(c)Parts which are excessively worn or which have been materially damaged shall not be used. Close visual inspection of parts shall be made during assembly to discover such wear or damage and immediate inspection of fastening devices shall be made after assembly to assure that they have been properly installed.
4/21/2017 The gas tank bracket for cars # 17 and # 31 need be proper repaired. The weld has cracked and completely seperated.45-1.6(c)
45-1.6(c)Parts which are excessively worn or which have been materially damaged shall not be used. Close visual inspection of parts shall be made during assembly to discover such wear or damage and immediate inspection of fastening devices shall be made after assembly to assure that they have been properly installed.
4/21/2017 Car # 12 has a crack in the front bumper that must be repaired.45-1.6(c)
45-1.6(c)Parts which are excessively worn or which have been materially damaged shall not be used. Close visual inspection of parts shall be made during assembly to discover such wear or damage and immediate inspection of fastening devices shall be made after assembly to assure that they have been properly installed.
4/21/2017 Replace bad front left bumper for car # 11.45-6.9(a)
45-6.9(a)All go-karts shall incorporate within their design a system to restrain the occupants, and roll over protection to, retain the driver and/or passenger in the go-kart in the event of collision or roll over.
4/21/2017 Replace worn padding for car # 20, (plywood exposed).45-6.9(b)
45-6.9(b)All go-karts shall incorporate within their design padding for component parts including but not limited to headrests and steering wheels.

View All Events Listing

Thanks for the feedback! It will help us improve your experience.