Skip to Content Skip to Navigation

Amusement Device Detials

The New York State Department of Labor inspects all amusement devices on or before the scheduled start date of an event. Only those devices deemed safe are allowed to operate. Detailed inspection results for each individual device will be posted within two weeks of the event start date.

For more information, look at our Frequently Asked Questions.

Details for device: SCAT

Violation Summary

Violations Issued This Season: 3 Violations Complied at Time of Inspection: 1
SCAT Violations
Date Cited Description Violation
8/24/2017 Repair or replace the damaged spotlight on top of ride sign.45-1.16
45-1.16While amusement devices, temporary structures, viewing stands and tents are in operation, all areas of access to and exits there from shall be provided with illumination by natural or artificial means sufficient to guard against personal injuries under these circumstances.
10/5/2017 Grease center hub.45-1.6(b)
45-1.6(b)Assembly work shall be performed in a proper and workmanlike manner. Parts shall be properly aligned, and shall not be bent, distorted, cut or otherwise injured to force a fit. Parts requiring lubrication shall be lubricated in course of assembly. Fastening and locking devices, such as bolts, cap screws, cotter pins, lock washers, etc. shall be installed where required. Nuts shall be drawn tight, cotter pins shall be spread and lock nuts firmly set.
10/5/2017 Secure gate entrance.45-1.6(b)
45-1.6(b)Assembly work shall be performed in a proper and workmanlike manner. Parts shall be properly aligned, and shall not be bent, distorted, cut or otherwise injured to force a fit. Parts requiring lubrication shall be lubricated in course of assembly. Fastening and locking devices, such as bolts, cap screws, cotter pins, lock washers, etc. shall be installed where required. Nuts shall be drawn tight, cotter pins shall be spread and lock nuts firmly set.

View All Events Listing

Thanks for the feedback! It will help us improve your experience.