Skip to Content Skip to Navigation

Amusement Device Detials

The New York State Department of Labor inspects all amusement devices on or before the scheduled start date of an event. Only those devices deemed safe are allowed to operate. Detailed inspection results for each individual device will be posted within two weeks of the event start date.

For more information, look at our Frequently Asked Questions.

Details for device: Klime-Wallz-Mobile

Violation Summary

Violations Issued This Season: 3 Violations Complied at Time of Inspection: 2
Klime-Wallz-Mobile Violations
Date Cited Description Violation
4/14/2017 Tighten all D-Links.45-1.6(b)
45-1.6(b)Assembly work shall be performed in a proper and workmanlike manner. Parts shall be properly aligned, and shall not be bent, distorted, cut or otherwise injured to force a fit. Parts requiring lubrication shall be lubricated in course of assembly. Fastening and locking devices, such as bolts, cap screws, cotter pins, lock washers, etc. shall be installed where required. Nuts shall be drawn tight, cotter pins shall be spread and lock nuts firmly set.
10/13/2017 Properly tighten the loose D-Link connecting cable to carabiner for right side drop.45-1.6(b)
45-1.6(b)Assembly work shall be performed in a proper and workmanlike manner. Parts shall be properly aligned, and shall not be bent, distorted, cut or otherwise injured to force a fit. Parts requiring lubrication shall be lubricated in course of assembly. Fastening and locking devices, such as bolts, cap screws, cotter pins, lock washers, etc. shall be installed where required. Nuts shall be drawn tight, cotter pins shall be spread and lock nuts firmly set.
4/14/2017 ID plate needed.45-2.5(a)
45-2.5(a)Every amusement device shall be identified by a trade or descriptive name and an identification number. A metal plate upon which there is legibly impressed the name and number of the device, its model number if any and the name and address of its manufacturer shall be firmly attached to the device in a readily visible location. The maximum safe number of passengers and the maximum safe speed, where applicable, shall be legibly impressed on the same plate or another metal place.

View All Events Listing

Thanks for the feedback! It will help us improve your experience.