Skip to Content Skip to Navigation

Amusement Device Detials

The New York State Department of Labor inspects all amusement devices on or before the scheduled start date of an event. Only those devices deemed safe are allowed to operate. Detailed inspection results for each individual device will be posted within two weeks of the event start date.

For more information, look at our Frequently Asked Questions.

Details for device: Himalaya

Violation Summary

Violations Issued This Season: 14 Violations Complied at Time of Inspection: 14
Himalaya Violations
Date Cited Description Violation
7/12/2017 Make additional entrance and exit steps for the device.45-1.6(a)
45-1.6(a)Competent supervision. The assembly and disassembly of an amusement device, temporary structure, viewing stand or tent shall be done by or under the immediate supervision of a person experienced and instructed in the proper performance of such work in respect to the device, structure, viewing stand or tent.
7/12/2017 Repair the latch device on car # 7.45-1.6(c)
45-1.6(c)Parts which are excessively worn or which have been materially damaged shall not be used. Close visual inspection of parts shall be made during assembly to discover such wear or damage and immediate inspection of fastening devices shall be made after assembly to assure that they have been properly installed.
8/9/2017 Provide that all seat bases are attached with R Keys in hold down pins.45-1.6(c)
45-1.6(c)Parts which are excessively worn or which have been materially damaged shall not be used. Close visual inspection of parts shall be made during assembly to discover such wear or damage and immediate inspection of fastening devices shall be made after assembly to assure that they have been properly installed.
8/9/2017 Remove double ended bolt snap on safety chain and replace with standard bolt snap on Tub 12.45-1.6(c)
45-1.6(c)Parts which are excessively worn or which have been materially damaged shall not be used. Close visual inspection of parts shall be made during assembly to discover such wear or damage and immediate inspection of fastening devices shall be made after assembly to assure that they have been properly installed.
8/9/2017 Remove double ended bolt snap on safety chain and replace with standard bolt snap on Tub 13.45-1.6(c)
45-1.6(c)Parts which are excessively worn or which have been materially damaged shall not be used. Close visual inspection of parts shall be made during assembly to discover such wear or damage and immediate inspection of fastening devices shall be made after assembly to assure that they have been properly installed.
8/9/2017 Repair the striker on the lap bar that does not pass the test gauge on tub 12.45-1.6(c)
45-1.6(c)Parts which are excessively worn or which have been materially damaged shall not be used. Close visual inspection of parts shall be made during assembly to discover such wear or damage and immediate inspection of fastening devices shall be made after assembly to assure that they have been properly installed.
8/9/2017 Repair the striker on the lap bar that does not pass the test gauge on tub 16.45-1.6(c)
45-1.6(c)Parts which are excessively worn or which have been materially damaged shall not be used. Close visual inspection of parts shall be made during assembly to discover such wear or damage and immediate inspection of fastening devices shall be made after assembly to assure that they have been properly installed.
8/9/2017 Repair the striker on the lap bar that does not pass the test gauge on tub 18.45-1.6(c)
45-1.6(c)Parts which are excessively worn or which have been materially damaged shall not be used. Close visual inspection of parts shall be made during assembly to discover such wear or damage and immediate inspection of fastening devices shall be made after assembly to assure that they have been properly installed.
8/9/2017 Repair the striker on the lap bar that does not pass the test gauge on tub 14.45-1.6(c)
45-1.6(c)Parts which are excessively worn or which have been materially damaged shall not be used. Close visual inspection of parts shall be made during assembly to discover such wear or damage and immediate inspection of fastening devices shall be made after assembly to assure that they have been properly installed.
8/9/2017 Repair the striker on the lap bar that does not pass the test gauge on tub 20.45-1.6(c)
45-1.6(c)Parts which are excessively worn or which have been materially damaged shall not be used. Close visual inspection of parts shall be made during assembly to discover such wear or damage and immediate inspection of fastening devices shall be made after assembly to assure that they have been properly installed.
8/9/2017 Repair the latch for the lap bar striker that does not pass the test gauge on tub 12.45-1.6(c)
45-1.6(c)Parts which are excessively worn or which have been materially damaged shall not be used. Close visual inspection of parts shall be made during assembly to discover such wear or damage and immediate inspection of fastening devices shall be made after assembly to assure that they have been properly installed.
8/9/2017 Repair the latch for the lap bar striker that does not pass the test gauge on tub 16.45-1.6(c)
45-1.6(c)Parts which are excessively worn or which have been materially damaged shall not be used. Close visual inspection of parts shall be made during assembly to discover such wear or damage and immediate inspection of fastening devices shall be made after assembly to assure that they have been properly installed.
8/9/2017 Repair the latch for the lap bar striker that does not pass the test gauge on tub 19.45-1.6(c)
45-1.6(c)Parts which are excessively worn or which have been materially damaged shall not be used. Close visual inspection of parts shall be made during assembly to discover such wear or damage and immediate inspection of fastening devices shall be made after assembly to assure that they have been properly installed.
8/9/2017 Repair or remove the light bar at the front of the ride that is rotted in the center.45-1.6(e)
45-1.6(e)Assembly and disassembly of amusement devices, temporary structures, viewing stands and tents shall be done under light conditions sufficient to permit the work to be properly performed and inspected.

View All Events Listing

Thanks for the feedback! It will help us improve your experience.