The New York State Department of Labor inspects all amusement devices on or before the scheduled start date of an event. Only those devices deemed safe are allowed to operate. Detailed inspection results for each individual device will be posted within two weeks of the event start date.
For more information, look at our Frequently Asked Questions.
|8/3/2017||Tighten cable between sweep arms||45-1.6(b)|
45-1.6(b)Assembly work shall be performed in a proper and workmanlike manner. Parts shall be properly aligned, and shall not be bent, distorted, cut or otherwise injured to force a fit. Parts requiring lubrication shall be lubricated in course of assembly. Fastening and locking devices, such as bolts, cap screws, cotter pins, lock washers, etc. shall be installed where required. Nuts shall be drawn tight, cotter pins shall be spread and lock nuts firmly set.
|8/3/2017||Install lapbar rubber on tub 9||45-1.6(c)|
45-1.6(c)Parts which are excessively worn or which have been materially damaged shall not be used. Close visual inspection of parts shall be made during assembly to discover such wear or damage and immediate inspection of fastening devices shall be made after assembly to assure that they have been properly installed.
|8/3/2017||Crib front jack||45-2.10(c)|
45-2.10(c)Before being used by the public, amusement devices and temporary structures shall be so placed or secured with blocking, cribbing, outriggers, guys or other means as to be stable under all operating conditions.
Thanks for the feedback! It will help us improve your experience.