Skip to Content Skip to Navigation

Amusement Device Detials

The New York State Department of Labor inspects all amusement devices on or before the scheduled start date of an event. Only those devices deemed safe are allowed to operate. Detailed inspection results for each individual device will be posted within two weeks of the event start date.

For more information, look at our Frequently Asked Questions.

Details for device: Funhouse

Violation Summary

Violations Issued This Season: 2 Violations Complied at Time of Inspection: 2
Funhouse Violations
Date Cited Description Violation
7/18/2017 Replace missing R-Keys from scenery.45-1.6(b)
45-1.6(b)Assembly work shall be performed in a proper and workmanlike manner. Parts shall be properly aligned, and shall not be bent, distorted, cut or otherwise injured to force a fit. Parts requiring lubrication shall be lubricated in course of assembly. Fastening and locking devices, such as bolts, cap screws, cotter pins, lock washers, etc. shall be installed where required. Nuts shall be drawn tight, cotter pins shall be spread and lock nuts firmly set.
5/26/2017 Install grip tape.45-2.13(b)
45-2.13(b)Stairways, landings and ramps shall be designed, constructed and maintained so as to sustain safely a live load of at least 90 pounds per square foot.

View All Events Listing

Thanks for the feedback! It will help us improve your experience.