Skip to Content Skip to Navigation

Amusement Device Detials

The New York State Department of Labor inspects all amusement devices on or before the scheduled start date of an event. Only those devices deemed safe are allowed to operate. Detailed inspection results for each individual device will be posted within two weeks of the event start date.

For more information, look at our Frequently Asked Questions.

Details for device: Tent & Viewing Stands

Violation Summary

Violations Issued This Season: 3 Violations Complied at Time of Inspection: 3
Tent & Viewing Stands Violations
Date Cited Description Violation
7/27/2017 Repair broken welds on aluminum bleacher railings. Several locations as identified at time of inspection.45-1.6(c)
45-1.6(c)Parts which are excessively worn or which have been materially damaged shall not be used. Close visual inspection of parts shall be made during assembly to discover such wear or damage and immediate inspection of fastening devices shall be made after assembly to assure that they have been properly installed.
7/27/2017 Repair non functioning scaffold pins and properly re-attach cross arms. Two locations on North bleachers as marked and shown to owner at time of inspection.45-1.6(c)
45-1.6(c)Parts which are excessively worn or which have been materially damaged shall not be used. Close visual inspection of parts shall be made during assembly to discover such wear or damage and immediate inspection of fastening devices shall be made after assembly to assure that they have been properly installed.
8/2/2017 replace worn strap used to secure tent pole near ticket entrance - COMPLIED ON SITE45-5.7(b)(2)
45-5.7(b)(2)Tent poles and their supports shall be of sufficient strength to withstand a wind pressure or suction of 10 pounds per square foot of tent surface and to resist a wind pressure of 20 pounds per square foot of projected area of tent.

View All Events Listing

Thanks for the feedback! It will help us improve your experience.