Skip to Content Skip to Navigation

Amusement Device Detials

The New York State Department of Labor inspects all amusement devices on or before the scheduled start date of an event. Only those devices deemed safe are allowed to operate. Detailed inspection results for each individual device will be posted within two weeks of the event start date.

For more information, look at our Frequently Asked Questions.

Details for device: Swings

Violation Summary

Violations Issued This Season: 3 Violations Complied at Time of Inspection: 0
Swings Violations
Date Cited Description Violation
6/1/2017 Cease use of ride till issued a valid permit from NYS DOL.45-1.13
45-1.13No person shall knowingly use, or suffer or permit to be used, an amusement device, temporary structure, viewing stand or tent, which is not properly assembled or which is defective or unsafe in any of its parts, components, controls or safety equipment.
7/27/2017 no insurance can be provided at this time no permit was issued ride closed45-1.13
45-1.13No person shall knowingly use, or suffer or permit to be used, an amusement device, temporary structure, viewing stand or tent, which is not properly assembled or which is defective or unsafe in any of its parts, components, controls or safety equipment.
6/1/2017 Properly install operator controls to be located away from the center of ride as per ride operation manual.45-1.6(b)
45-1.6(b)Assembly work shall be performed in a proper and workmanlike manner. Parts shall be properly aligned, and shall not be bent, distorted, cut or otherwise injured to force a fit. Parts requiring lubrication shall be lubricated in course of assembly. Fastening and locking devices, such as bolts, cap screws, cotter pins, lock washers, etc. shall be installed where required. Nuts shall be drawn tight, cotter pins shall be spread and lock nuts firmly set.

View All Events Listing

Thanks for the feedback! It will help us improve your experience.