Skip to Content Skip to Navigation

Amusement Device Detials

The New York State Department of Labor inspects all amusement devices on or before the scheduled start date of an event. Only those devices deemed safe are allowed to operate. Detailed inspection results for each individual device will be posted within two weeks of the event start date.

For more information, look at our Frequently Asked Questions.

Details for device: House of Horrors and Haunted Catacombs

Violation Summary

Violations Issued This Season: 7 Violations Complied at Time of Inspection: 7
House of Horrors and Haunted Catacombs Violations
Date Cited Description Violation
9/29/2017 Secure the trunk, baby, and baby carriage in Hellhouse.45-1.6(b)
45-1.6(b)Assembly work shall be performed in a proper and workmanlike manner. Parts shall be properly aligned, and shall not be bent, distorted, cut or otherwise injured to force a fit. Parts requiring lubrication shall be lubricated in course of assembly. Fastening and locking devices, such as bolts, cap screws, cotter pins, lock washers, etc. shall be installed where required. Nuts shall be drawn tight, cotter pins shall be spread and lock nuts firmly set.
9/29/2017 Uncover the exit and emergency light system in the scardy hallway outside Hellhouse.45-1.6(b)
45-1.6(b)Assembly work shall be performed in a proper and workmanlike manner. Parts shall be properly aligned, and shall not be bent, distorted, cut or otherwise injured to force a fit. Parts requiring lubrication shall be lubricated in course of assembly. Fastening and locking devices, such as bolts, cap screws, cotter pins, lock washers, etc. shall be installed where required. Nuts shall be drawn tight, cotter pins shall be spread and lock nuts firmly set.
9/29/2017 Secure top heavy cabinet to wall in cryo-gen hallway in Infected.45-1.6(b)
45-1.6(b)Assembly work shall be performed in a proper and workmanlike manner. Parts shall be properly aligned, and shall not be bent, distorted, cut or otherwise injured to force a fit. Parts requiring lubrication shall be lubricated in course of assembly. Fastening and locking devices, such as bolts, cap screws, cotter pins, lock washers, etc. shall be installed where required. Nuts shall be drawn tight, cotter pins shall be spread and lock nuts firmly set.
9/29/2017 Position the hook through the chicken in Theater I/II so as to not be a hazard to the public.45-1.6(c)
45-1.6(c)Parts which are excessively worn or which have been materially damaged shall not be used. Close visual inspection of parts shall be made during assembly to discover such wear or damage and immediate inspection of fastening devices shall be made after assembly to assure that they have been properly installed.
9/29/2017 Remove padlock and hasp from exterior exit door from the building45-4.3(a)
45-4.3(a)Exits. At least two exits remote from each other shall be provided from each floor, tier, room or balcony in a building or structure to which this Subpart applies. No exit shall be less than 18 inches wide.
9/29/2017 Provide exit signs on scardy exit at the far rear corner of the Mark of the Beast.45-4.3(c)(1)
45-4.3(c)(1)Exit directional signs and exit path marking. Location. Exit directional signs shall be provided at locations in hallways, passageways, corridors, aisles and at all other locations from which exit doorways are not readily discernible. Low level exit path marking shall be allowed in lieu of exit directional signs.
9/29/2017 Provide an emergency light in the last set of hallways nearest to the exit of Hellhouse.45-4.3(d)
45-4.3(d)Emergency lighting. Each building or structure shall be equipped with an emergency lighting system conforming to the requirements of Part 1032, of Title 9 NYCRR Emergency Power and Lighting, of the New York State Uniform Fire Prevention and Building Code, effective January 1, 1984. In addition, the emergency lighting system shall be automatically activated by the operation of the fire and smoke detection system required under subdivision 45-4.3(e) of this Subpart.

View All Events Listing

Thanks for the feedback! It will help us improve your experience.