Skip to Content Skip to Navigation

Amusement Device Detials

The New York State Department of Labor inspects all amusement devices on or before the scheduled start date of an event. Only those devices deemed safe are allowed to operate. Detailed inspection results for each individual device will be posted within two weeks of the event start date.

For more information, look at our Frequently Asked Questions.

Details for device: Swinger

Violation Summary

Violations Issued This Season: 7 Violations Complied at Time of Inspection: 6
Swinger Violations
Date Cited Description Violation
9/15/2017 Do not load chair 5 until the seatbelt is repaired or replaced.45-1.6(c)
45-1.6(c)Parts which are excessively worn or which have been materially damaged shall not be used. Close visual inspection of parts shall be made during assembly to discover such wear or damage and immediate inspection of fastening devices shall be made after assembly to assure that they have been properly installed.
9/15/2017 Do not load chair 13 until the seatbelt is repaired or replaced.45-1.6(c)
45-1.6(c)Parts which are excessively worn or which have been materially damaged shall not be used. Close visual inspection of parts shall be made during assembly to discover such wear or damage and immediate inspection of fastening devices shall be made after assembly to assure that they have been properly installed.
9/15/2017 Do not load chair 17 until the seatbelt is repaired or replaced.45-1.6(c)
45-1.6(c)Parts which are excessively worn or which have been materially damaged shall not be used. Close visual inspection of parts shall be made during assembly to discover such wear or damage and immediate inspection of fastening devices shall be made after assembly to assure that they have been properly installed.
9/15/2017 Do not load chair 20 until the seatbelt is repaired or replaced.45-1.6(c)
45-1.6(c)Parts which are excessively worn or which have been materially damaged shall not be used. Close visual inspection of parts shall be made during assembly to discover such wear or damage and immediate inspection of fastening devices shall be made after assembly to assure that they have been properly installed.
7/4/2017 Repair cracks found in welds and steel plate. 1) See two cracks in welds located near the top hinge. 2) See three cracks in the lower hinge steel plate.45-1.6(c)
45-1.6(c)Parts which are excessively worn or which have been materially damaged shall not be used. Close visual inspection of parts shall be made during assembly to discover such wear or damage and immediate inspection of fastening devices shall be made after assembly to assure that they have been properly installed.
7/18/2017 Cracks found in lower hinge. Repaired at time of inspection. Note: NDT was performed after repair, no cracks detected. Rockys Welding & Fabrication. Applus: MAG Particle INSP.45-1.6(c)
45-1.6(c)Parts which are excessively worn or which have been materially damaged shall not be used. Close visual inspection of parts shall be made during assembly to discover such wear or damage and immediate inspection of fastening devices shall be made after assembly to assure that they have been properly installed.
7/25/2017 Properly number the unreadble # stickers on the back of (6) seats. Complied at visit45-2.5(b)
45-2.5(b)Each passenger carrying car, seat etc. in an amusement device or temporary structure shall be identified with an identification number in a readily visible location.

View All Events Listing

Thanks for the feedback! It will help us improve your experience.